ZX 430/470/560 GL-GD
Krone’s all new generation of ZX silage wagons are sure to hit the ground running. With the reputation of fastest silage wagon in the world Krone have engineered this series with state of the art technology for maximum performance and productivity. The ZX series comes in 3 sizes 43m³, 47m³, and 56m³ and an extra wide pickup of 2125mm.
)
Features
-
Easyflow Pick-up
The Camless EasyFlow pick-up has 60% fewer moving parts resulting in quieter running and reduced wear while the crop feed roller eliminates the risk of crop pushing in uneven swaths.
Guide wheels at the rear of the pickup enhance the overall running of the wagon. They help to ensure that the wagon does not run in the tractor wheelings ensuring that optimal pick-up height is maintained.
Easy flow pick-up has been increased by 100mm to a total working width of 2125mm wide.
Hydraulically driven pickup with the flexability to adjust speed manually between 800rpm- 1500rpm or automatically based off the ground speed.
The tines have been arranged in a W formation helping feed material into the middle avoiding material build up when turning helping distribute material across the full rotor width.
-
Feed Rotor
Massive 880mm rotor cutter offers a maximum width of 1910mm maximising the filling capacity and productivity. The helical tine rows offer quieter running.
The rotor tines made of hardox steel feature extra wide feed plates that provide gentle crop treatment and enhanced quality of cuts and reduced power.
The knife bank lowers hydraulically to remove any blockages, once the blockage has been cleared the bank swings back into position.
-
The Cutting System
48 knives provid a nominal cut length of 37mm. The knife draw swings out hydraulicly for convenient knife change and to remove andy potential blockages.
All knives are individually protected by a spring mechanism that breaks back when hitting a foreign object, once the object is passed they return to cutting position automatically.
SpeedSharp comes as standard. This system is an automatic multi-knife sharpener with all knives sharpened within about 4 minutes.
-
Hydraulic Moveable Headboard
The headboard work by moving to on of three positions: 1 filled to capacity at the end of filling cycle. 2 Filling position as set by the operator. 3 unloading position ensuring fast and effective unloading.
When the rear of the wagon is filled to capacity the headboard inclines toward the tractor to increase the load volume area.
When unloading the headboard inclines towards the rear end of the machine, pushing the material to the rear
The PowerLoad automatic loading system relies on the established sensor that is integrated in the headboard measuring the forces acting on the headboard.
-
Chain and Slat Floor
The 350mm sloping front wall allows for lower power requirement, higher compression, eliminate forage tipping over, and eliminating squeezing and compressing.
The four flat-link chains have a breaking load of 12t so you can rest assured the reliability and durability of the floor.
Two gearboxes with flange-mounted hydromotors provide maximum torque on the driveshafts of the floor chains.
-
Operations and Electronics
2 sensors are mounted to the front wall used for the automatic loading system, sensor1 measures the pre-compression at the front of the wall and sensor 2 measures the volume at the front wall.
The scraper conveyor movement is regulated automatically and continuously to ensure an even load along the entire length of the wagon.
A scale system comes as standard with an accuracy of +/-2.5% with weights being able to be stored in the operators customer counter.